Mini loss-in-weight feeder from Schenck Process

Big isn’t always better. From Schenck Process
there is now an ideal solution for feeding
very small volumes of powder, and it’s called
MechaTron® Min. This gravimetric feeder has
a delivery rate between 100g/h and 10kg/h.
Typical applications include laboratory and
test facilities for feeding extruders, mixers,
mills and granulators.
The MechaTron® Min features a double
shaft and vertical agitator. It is designed to
allow quick dismantling for cleaning and
replacement of the discharge devices.
Two different feed hoppers are available
to suit different products and delivery rates.
The 4 l hopper with negative taper has an
agitator that works near the base and is
suitable for manual filling and small outputs.
The 8 l hopper is conical and also has an
agitator that works near the walls and a
cover with refill and ventilation necks for
larger outputs and automatic refilling.
Both versions come with high quality
integrated measurement, control and
regulation electronics. The drive and
weighing technology is contained in a dustprotected
housing. An extra protective
housing can be fitted over the entire system
to minimize environmental disturbances.
This is particularly recommended for small outputs.
It’s the small system that’s big on performance. This gravimetric feeder has
a delivery rate between 100g/h and 10kg/h.
Typical applications include laboratory and
test facilities for feeding extruders, mixers,
mills and granulators.
The MechaTron® Min features a double
shaft and vertical agitator. It is designed to
allow quick dismantling for cleaning and
replacement of the discharge devices.
Two different feed hoppers are available
to suit different products and delivery rates.
The 4 l hopper with negative taper has an
agitator that works near the base and is
suitable for manual filling and small outputs.
The 8 l hopper is conical and also has an
agitator that works near the walls and a
cover with refill and ventilation necks for
larger outputs and automatic refilling.
Both versions come with high quality
integrated measurement, control and
regulation electronics. The drive and
weighing technology is contained in a dustprotected
housing. An extra protective
housing can be fitted over the entire system
to minimize environmental disturbances.
This is particularly recommended for small outputs.